1. Make sure that the power switch is in the off (O) position.
2. Plug the power plug into a power outlet.
Note: Do not place the device in a location where it is difficult to disconnect
the power cords.
3. Remove the inhalation top from the medication tank.
- Rotate the inhalation top anti-clockwise.
- Lift the inhalation top out of the medication tank.
4. Add the correct amount of prescribed medication to the medication tank.
5. Make sure that the vaporizer head is placed in the medication tank.
6. Put the inhalation top back onto the medication tank.
1) Lower the inhalation top on the medication tank.
2) Rotate the inhalation top clockwise.
7. Attach the mask, mouthpiece or nosepiece to the nebulizer kit tightly.
8. Attach the air tube. Twist the air tube plug slightly and push it firmly into the air tube connector.
9. Hold the nebulizer kit as indicated below.
Follow the instructions of your doctor or respiratory therapist.
10. Turn the power switch to the on (I) position. As the compressor starts, nebulization begins and aerosol is generated.
Inhale the medication.
11. When treatment is complete, turn the power off and unplug the compressor from the power outlet.
- Please refer to Omron C101 Instruction Manual for more instructions
